Which 22 pellets for accuracy

[rapidresponse1]

i use air arm fields in all of my guns

[junglie]

Again evidence that there is no one answer. I used this after cleaning pellets to stop them oxidising; did not see any improvement compared to either ‘out-of-the-tin’ or ‘cleaned’. What has happened, after a number of months, is the lube has gone sticky, it will need washing off again.

I picked up a 2 shot venom raider that i'd had resealed & when i was putting the stock back on at home 2 bisley magnums fell out the shuttle that were covered with a sticky waxy gunk, i wondered what that was , thanks for solving the puzzle.

[ashf9999]

Again evidence that there is no one answer. I used this after cleaning pellets to stop them oxidising; did not see any improvement compared to either ‘out-of-the-tin’ or ‘cleaned’. What has happened, after a number of months, is the lube has gone sticky, it will need washing off again.

I wonder if the likes of pre-lubed Napier pellets also suffer from that issue, or if they use a different formula. Hadn't noticed any particular issue on the odd tin I've used it with.

[Shooter22UK]

I use .22 calibre even for target shooting and I find the JSB Exact Diabolos in 5.51 , 15.89 grain perfectly good for target shooting at 25 meters, but I only compete against myself.

[gsxrman]

I haven't used FAC .22, cant see the point, but at 12ftlb the FTT pellet is very good but the Crossman Premier is superb. I found that accupell,s vary way too much to be consistently accurate.