HW break barrel quick change pivot pin?

[hammy]

I fitted a Robb one just the other week to my 35, it does a good job but you have to watch the clearance with the stock. Mine has marked the inside of the stock. Doesn't matter on this gun as it's my tatty squirrel gun for work, but the clearance is something to look for.

[PhatMan]

Hello to All,

+1 on Shauny's take down pins - for me, they are excellent, and I have them in all my HWs.

(They use one (1) circlip)

Much more robust that the tiny screw setup that is on the VMach - there have been reports of chappies having to drill out the screw as it has tightened during use.

(I replaced the VMach pins in my HWs with the Shauny versions with perfect satisfaction ( for me))

Have fun & a good Sunday

Best regards

Russ

[darren m]

Hello to All,

+1 on Shauny's take down pins - for me, they are excellent, and I have them in all my HWs.

(They use one (1) circlip)

Much more robust that the tiny screw setup that is on the VMach - there have been reports of chappies having to drill out the screw as it has tightened during use.

(I replaced the VMach pins in my HWs with the Shauny versions with perfect satisfaction ( for me))

Have fun & a good Sunday

Best regards

Russ

how do you contact Shauny , is he on this forum - thanks

[darren m]

anyone got of picks of the 3 types mentioned ,, shauny , Tr robb , venom .. for comparison
thanks

[vestlenning]

shauny is active on "the other forum" ...

[averageplinker]

Would it be possible for someone to give a direct answer about how to contact Shauny? By PM if you would prefer!

[PhatMan]

averageplinker,

Your Inbox is full.

I have PM'd Darren M.

Have fun

Best regards

Russ

[averageplinker]

Cheers all.

[averageplinker]

A very kind member of this forum sent me one. I appear to have deleted his details in a rushed PM tidy up exercise so am unable to say thank you directly.
I hope kind sir, that you look back at this thread and see this expression of gratitude. I only wish I was not such a numb nuts and could thank you properly!
ATVB Rich.

[threelander]

Someone on this forum made me one for a fwb124 I had, that's had it's original replaced with a nail(not by me!). It was allen head on both ends(locking screw inside the pin & very well made.But I forget who unfortunetly.....sure he used to do them for hw's too?

Would that be Paul Short

[bighit]

Not sure if he is on here but the Squire on the other forum makes them similar to the V-Mach ones which you cant get now as Lyn is out of them.

I prefer the V-Mach type to the agricultural circlip on the ends design. It looks neater.

[Mach 1.5]

I have a Paul Short version and had to drill out the screw as it also had tightened during use. Mach 1.5

[Harley_Steve]

shauny is active on "the other forum" ...

Not any more, he's been banned.

[brk1]

Not any more, he's been banned.

He's still busy other places if you know where to look

I had a 99s QR pin off him a week or so ago

[The Squire]

Not sure if he is on here but the Squire on the other forum makes them similar to the V-Mach ones which you cant get now as Lyn is out of them.

I prefer the V-Mach type to the agricultural circlip on the ends design. It looks neater.

Yep I’m here!