Results 1 to 15 of 18

Thread: Low Recoil 357mag loads

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Dec 2003
    Location
    West Lothian, Scotland
    Posts
    622

    Low Recoil 357mag loads

    I'm only shooting at 25yd max at my range so dont see the point of heavy loading.
    Anyone got experience of nice easy loads.
    I have 148 and 140gr slugs with N320 and Red Dot.
    What have you been using ?

  2. #2
    Join Date
    Feb 2013
    Location
    Stirling
    Posts
    135
    I've used the following load successfully through my Marlin .357 (18.5" barrel, microgroove)
    GM 148gr DEWCBB, Fed 100 (or Rem 1.5 or CCI 500) primer, 3.3gr N320, C.O.L.: 1.382".
    925fps, 281ft-lb. S.D.: 13.5, CoV: 1.2%
    Group size (edge-to-edge, 10 shots): 34mm.

    NB. This load was no use in my Taurus LBR; there I got around 710fps, and a group size over 70mm...

  3. #3
    Join Date
    Dec 2003
    Location
    West Lothian, Scotland
    Posts
    622

    .

    I couldnt go that low with my marlin.
    Only got good grouping at 4.3gr
    Id like to take the taurus down to about 600 fps so Red Dot may be the way to go. Maybe even Unique.
    Never come across anyone using anything lighter than 158gr so im looking for info on lighter bullets like 110, 125, 140gr bullets.

  4. #4
    Join Date
    Apr 2014
    Location
    Watford
    Posts
    927
    http://www.hodgdonreloading.com/data/pistol
    Try the above for some info , alternatively if you want a low recoil load then use 38special.
    ATB
    James

  5. #5
    Join Date
    Aug 2010
    Location
    Selby, Yorkshire
    Posts
    215
    Hi

    I use a 105gr SWC slug cast from range scrap with 3.4gr of Bullseye or HP38. Very light bullet, makes very neat holes in paper and very accurate at 20yds, haven't tried any further out. Works great with the same load in my Marlin and Alfa LBR, saves me making two different loads.
    I have to cast the bullets myself and as they are a SWC profile, they are rubbish for rapid feeding from the Marlin tube magazine, so I just load one at a time.
    I have used less powder before - 3gr was my standard load for a while - but found I preferred a slightly louder bang with 3.4gr. Couldn't see any difference in accuracy though that's my dodgy eyes and iron sights rather than proper load development.

    Cheers!
    NSRA and NRA qualified RCO.

  6. #6
    Join Date
    Dec 2003
    Location
    West Lothian, Scotland
    Posts
    622
    Hi Mr A factor,
    are you using 357 mag or 38 spl cases.
    It seems lower preassure and speed are better from 38 spl load data.
    I have plenty 38 cases but found 357s were easier to load with speedloader.
    I'll need to start practicing with 38 cases now.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •