Quote Originally Posted by T 20 View Post
I can recall BBS member, Mattyboy, fitting a HW55 action into a HW50 stock, and from a quick measure up this morning the mounting holes on the HW50 and HW55 action are the same distance apart at 7.25 inches.
My mistake, I found a thread where Mattyboy fitted either a 50 or 55 action into a HW95 stock.

At a quick glance a HW95 stock would just need some wood inletting into the cocking lever slot and a new front mounting hole drilling for a 50 of 55 action.
It should be possible to hide the inletted wood by fitting an aluminium accessory rail over it and using a countersunk front stock screw --- just another option to look at.




All the best Mick