Quote Originally Posted by Mark D View Post
Hi Dom

When you say you have removed all of the CO2 tube, I take it that you have removed the barrel and then the hidden grub screw under the front grub screw hole that holds the CO2 tube in place.
The CO2 tube then unscrews in an anti clockwise fashion. You should then be able to lift out the block complete with the trigger guard.
On my TH model it needed a lot of effort to remove the tube and the wriggle the action out as it was a very tight fit. HTH

Nice to hear of another Alros Starfire surfacing.

Be good to see a photo and any details of markings on the action block.
Ahh, that would make a difference then. I assumed, wrongly then, that removing the cylinder would release the action with the barrel still on.
I think I must have left the valve in the block and that's what's catching on the stock. I've screwed the cylinder back in yesterday at it still works so I'll have a go at taking the barrel out first tomorrow.

If you want to see pics have a look on the other forum as I never managed to upload pics on here successfully. My action is blued shines but has no other markings......dom