Having had good look on how I can improve things, an SSG would be the easier route.
I hope to make one internal to the hammer,
fixed at the rear.
Needs a bit of thought first.
Thank you for your help.
Having had good look on how I can improve things, an SSG would be the easier route.
I hope to make one internal to the hammer,
fixed at the rear.
Needs a bit of thought first.
Thank you for your help.
Repariere nicht, was nicht kaputtist.
I've done a few SSGs, i stuck up a post on here a while ago. The telescopic spring guide version is anways an option, except for extremely short hammer strokes, and fits inside. I don't think external devices are a realistic option due to UK power laws, unless on bullpups where external to the action is still internal to the stock (whcih I did on my Kral and JKHan)
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
I have an external SSG adjustment on my R10 (only way to do it), don't think it's a problem as it not a problem having anti tamper removed from air guns,
Looking atg that hammer you could do something similar to my Kral hammer if you have a lathe.
R10
Kral
Thank you for the pictures.
Look like a mk2 is on the cards.
Repariere nicht, was nicht kaputtist.
Some ideas for you.
How are your results with the ssg Neil
Ive made a few for various pcps Ive owned and just now been tinkering with a kral, Ive found the best float to be 0.5 to 1.00mm any bigger and the fps spread rises and Ive never matched the consistency of a well set up H’spring and not always gained shots either, get it right and they do work well
Chris
bigtoe, Harry, hydroclamp, jpsnorton, gayle89, mark410, Stu83, smallholder1, wellhouse0, readingcop, sir-slots-alot, danco1987, Stevenb, DarylDiane, simpleSimon, Ratinator, Milek, Josh, Maxtich, Woodsie99, Ozzie, master_shriller, niloc, Drake267, deejayuu, shootingstars