Slingshot hammer

[Shed tuner]

Having had good look on how I can improve things, an SSG would be the easier route.
I hope to make one internal to the hammer,
fixed at the rear.

Needs a bit of thought first.
Thank you for your help.

I've done a few SSGs, i stuck up a post on here a while ago. The telescopic spring guide version is anways an option, except for extremely short hammer strokes, and fits inside. I don't think external devices are a realistic option due to UK power laws, unless on bullpups where external to the action is still internal to the stock (whcih I did on my Kral and JKHan)

[Tricky-Ricky]

I have an external SSG adjustment on my R10 (only way to do it), don't think it's a problem as it not a problem having anti tamper removed from air guns,
Looking atg that hammer you could do something similar to my Kral hammer if you have a lathe.

R10


Kral

[Neil54]

Thank you for the pictures.

Look like a mk2 is on the cards.

[Tricky-Ricky]

Some ideas for you.

[Neil54]

Here is my mk2 shown alongside the original hammer in black.


Promising results although I feel the spring is over compressed.
Works well. Instant noise reduction, I thought it wasn't working properly.
Thank you for all your help and advice.

[32:1]

How are your results with the ssg Neil

Ive made a few for various pcps Ive owned and just now been tinkering with a kral, Ive found the best float to be 0.5 to 1.00mm any bigger and the fps spread rises and Ive never matched the consistency of a well set up H’spring and not always gained shots either, get it right and they do work well


Chris

[Shed tuner]

nice Neil. That's the design I call "telescopic spring guide" as it's completely internal. There's probably another name out there...
The noise reduction these give is really impressive.