Results 1 to 6 of 6

Thread: SMK CP1 CO2 oring seal

  1. #1
    Join Date
    Aug 2004
    Location
    Stevenage, Herts
    Posts
    950

    SMK CP1 CO2 oring seal

    Hi all,
    I'm having a bit of difficulty finding a replacement seal for my SMK CP1 pistol. Like the one below:https://spares.bagnallandkirkwood.co...cp2-and-diana/

    All the kit packs on seem pretty pricey too. Has anyone seen a list of sizes for the orings in these pistols so I can reseal the whole thing and buy a load in as spares?
    Thanks
    Danny
    My collection = Ratworks BSA Scorpion T-10 .177, HW100KS .177 (tweaked by me), PP750, Crosman 1322 and 1377

  2. #2
    Join Date
    Aug 2016
    Location
    Melton Mowbray
    Posts
    1,947
    Have you got the dimensions of the seal in you need?
    Repariere nicht, was nicht kaputtist.

  3. #3
    Join Date
    Aug 2004
    Location
    Stevenage, Herts
    Posts
    950
    Quote Originally Posted by Neil54 View Post
    Have you got the dimensions of the seal in you need?
    I haven't got the dimensions to hand. Was after a list of dimensions for all the seals if one exists? Then I plan to order bulk of all of them so I'm covered going forward.
    If there isn't a list out there. I'll take it apart and measure them up

    Cheers
    Danny
    My collection = Ratworks BSA Scorpion T-10 .177, HW100KS .177 (tweaked by me), PP750, Crosman 1322 and 1377

  4. #4
    Join Date
    Dec 2016
    Location
    leeds
    Posts
    2,061
    i sell kits for them and most are std sizes but the co2 seal i have made and barrel orings took me a long time to source
    a full set is £2.90 plus post and inc's a spare pair of barrel orings

  5. #5
    Join Date
    Dec 2016
    Location
    leeds
    Posts
    2,061
    i do the co2 seal that's in your link at 5 for a fiver plus post

  6. #6
    Join Date
    Aug 2004
    Location
    Stevenage, Herts
    Posts
    950
    Thanks guys. Ped, I'll pm you for a kit.

    Cheers
    Danny
    My collection = Ratworks BSA Scorpion T-10 .177, HW100KS .177 (tweaked by me), PP750, Crosman 1322 and 1377

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •