Excellent information; cheers Pete.
Excellent information; cheers Pete.
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- August 3/4, 2024.........BOING!!
When I come to reassemble with the WW kit how many “power bands” are you using in your Airsporter?
I understand each rifle can be different but just so I have an idea
Cheers
Last edited by Joseyw; 02-12-2021 at 07:35 PM.
Did you tell Will what power you wanted to run the rifle at? Will could get the power you want with the spring and then you fine tune it with the power bands, you need to use the flat slip washers so the spring can completely revolve, one slip washer in the bottom of the piston with the top hat on top of that, then a thin power band on the top hat with the spring end on top of that, then a slip washer on the spring guide with another slim power band on that and then the spring on the guide with the spring end on the power band, you aim to make the spring uncoil without any contact with the piston or trigger block, so all the torque from the spring isn't transfered to the cylinder, personally I would aim for 10.5ftp, 11 max.
Pete
Last edited by look no hands; 03-12-2021 at 04:35 AM.
Far too many rifles to list now, all mainly British but the odd pesky foreigner has snuck in
No, there wasn’t that option when I ordered from Woodfield gcp site, only which caliber was required, sounds like 2 of the three power bands is a good place to start