What scope mounts are you using on your pre 2006 Webley break barrel rifles?

[robs5230]

Asking as I'm looking for scope mounts for a brummie Longbow.

Sportsmatch appear to sit off to one side. I can't cope with mounts on the piss like this.
BKL need a bit too much of a spread to get them to fit.

Are there any 2pc mounts that sit straight on these dovetails?

Thanks Rob

[tomdavies9]

https://www.ant-supplies.uk/scope-ri...ope-rings.html

Ant supplies do these steel ring mounts which have a clamp bolt at either side, so you can get them central. I bought a few to use with my SSPs as they look a bit retro and the low mount is VERY LOW, which I also like no experience with them on pre 2006 Webley break barrels though.

[robs5230]

https://www.ant-supplies.uk/scope-ri...ope-rings.html

Ant supplies do these steel ring mounts which have a clamp bolt at either side, so you can get them central. I bought a few to use with my SSPs as they look a bit retro and the low mount is VERY LOW, which I also like no experience with them on pre 2006 Webley break barrels though.

Thanks Tom.
I did look at these earlier, but not keen on the double sided clamps on a springer.
Cheers

[bootneckbob]

Hi Rob,
no experience with Webley either, but I use Parker Hale (steel) mounts which are on my 80/90s rifles; one of which is BSA Mercury Challenger (with the maxigrip scope rail) and the other is a AA Pro Target which I would have thought is pretty standard??

[robs5230]

Cheers Rob

[Bluefan]

Sports match or BKLs on mine, seems to keep everything in place.

[Mach 1.5]

I use period webley own brand of mounts. Only problem is they are getting a little hard to find. Mach 1.5

[averageplinker]

I have some Webley mounts I was going to dig out and sell. I am happy to give the OP first dibs when I start a sales thread. (Mods I hope this is ok?). I can't vouch that they will sit straighter on the rifle though.
Rich.

[robs5230]

I have some Webley mounts I was going to dig out and sell. I am happy to give the OP first dibs when I start a sales thread. (Mods I hope this is ok?). I can't vouch that they will sit straighter on the rifle though.
Rich.

I'd appreciate you giving me a heads up.
Thanks for that

I have just placed a wanted ad for some

[T 20]

I have some Webley mounts I was going to dig out and sell. I am happy to give the OP first dibs when I start a sales thread. (Mods I hope this is ok?). I can't vouch that they will sit straighter on the rifle though.
Rich.

Just give Rob first dibs before you start a sales thread, Rich.

Either way there's no problem selling via PM on here.




All the best Mick

[angrybear]

With BKL's you remove the clamp bolts, put one in from the other side & wind the clamp open to fit it on the rail .

[robs5230]

With BKL's you remove the clamp bolts, put one in from the other side & wind the clamp open to fit it on the rail .

Hi.
Yes I use BKL's on all my PCP's so aware of spreading them.

[averageplinker]

PM sent.
Rich

[robs5230]

PM sent.
Rich

Thanks very much for the offer Rich.
They're highs and I need mediums

[tomdavies9]

Thanks Tom.
I did look at these earlier, but not keen on the double sided clamps on a springer.
Cheers

No worries mate, I’ve never had any issues, but then I’ve never used them on a recoiling rifle, so it’s hard to back that horse so to speak