3D printed magazines

[Neil.]

Done the first HW100 one tonight.

Done in Verbatim ABS

Yeah I know its green, but I'm doing some Johnny Seven stuff too.

[angrybear]

Well done, looks pretty good to me, & should be easy to spot if you drop it.

[Neil.]

Well done, looks pretty good to me, & should be easy to spot if you drop it.

I'll bung on an O ring in the morning and see how it goes.
TBH, I'm more interested in the functionality than anything else.

I've just about cracked this 3D malarkey.....

[38thfoot]

There’s some 3D printed AA mags on the bay of evil, going for £20, I’m quite tempted.

38

[Neil.]

Going to make a few of these in .177 and .22 Probably ready mid next week

If anybody wants one to test, a SAE is all thats req....

They will be printed in odd colours like red, white blue, green etc and some may be luminous as I finish off end of filament spools of ABS and PLA

[oldboyshooter]

Hello, would test a 110 in 22 if you make any, also some 8 shot mags for a FX Verminator MK1 , cheers

[rusteh]

Going to make a few of these in .177 and .22 Probably ready mid next week

If anybody wants one to test, a SAE is all thats req....

They will be printed in odd colours like red, white blue, green etc and some may be luminous as I finish off end of filament spools of ABS and PLA

Not sure how long you've been into 3d printing and don't want to teach you to suck eggs, but worth noting that luminous filament is quite abrasive and can ruin brass nozzles in quite short order - stainless nozzles are a good upgrade (if available for your printer)