Results 1 to 4 of 4

Thread: Walnut stock. Care

  1. 15-01-2022, 05:36 PM #1
    Tonynw1
    Tonynw1 is offline Registered User
    Join Date
    Jan 2022
    Location
    Preston
    Posts
    229

    Walnut stock. Care

    What is the best to use on a walnut stock to protect it from finger marks ect.

    Thanks.
    Reply With Quote Reply With Quote
  2. 15-01-2022, 06:46 PM #2
    Neil54's Avatar
    Neil54
    Neil54 is offline Registered User
    Join Date
    Aug 2016
    Location
    Melton Mowbray
    Posts
    2,082
    If bare wood, apply oil with wire wool, wipe off excess. Follow the instructions with the oil. I use liberon finishing oil.

    If finished wood, clean the surface. Apply polish.
    Or clean the stock with methylated spirt and fine wire wool.
    Apply oil of your choice.
    Repariere nicht, was nicht kaputtist.
    Reply With Quote Reply With Quote
  3. 15-01-2022, 06:48 PM #3
    Neil54's Avatar
    Neil54
    Neil54 is offline Registered User
    Join Date
    Aug 2016
    Location
    Melton Mowbray
    Posts
    2,082
    P.s. avoid getting oil or polish in the checkering.
    Repariere nicht, was nicht kaputtist.
    Reply With Quote Reply With Quote
  4. 15-01-2022, 10:36 PM #4
    PCPShooter
    PCPShooter is offline Registered User
    Join Date
    Nov 2011
    Location
    Bexhill-On-Sea
    Posts
    5,442
    Boiled linseed 2/3rds to 1/3rd white spirit will give a nice finish
    Wire wool or flour paper will fill pores in wood too if you want to have a ‘sealed’ finish
    Looking for TO-6 Trigger unit unmessed with or T0-6 kit for 34
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules