Originally Posted by
Rich
Stay here for the moment as the PM box allocation on this site isn't all that generous.
The service I offer is inclusive. You send the stock, I mask it up with tape and draw where the cut line would go, in my opinion. I send you a photo, you agree the proposed line or we alter it.
Once it's agreed, I do the work. I make all the bits. The riser pins are stainless, the bushes are either aluminium or brass, your choice.
I make the pins long enough for the extension you are looking for, all the time looking to house them inside the stock in the closed position.
I refinish the cut edges to match as best I can the natural timber. If a perfect colour match is not on then I make the cut edges slightly darker, as the eye expects to see them in shadow.
I take a photo of the finished job and email it to you with my bank details for payment. Once paid, the stock goes to the PO to catch the next PF48 van back to you.
The only snag at the moment is, my workshop is not in full commission since my recent house move, and it will be about 4 weeks before I take on new work.
By all means PM with your thoughts and then we'll take it to email.