Reloading parts list?

[DannyT]

Hi all,

I recently posted on here about which press to get and got some really helpful replies.

I'm new to reloading and based on research and reviews, I'm planning on getting a 'Lee auto breechlock pro' press.

I'll be putting in an order for this soon, for when I start reloading.

Full disclosure, I don't have a slot for the ammunition or gun that I intend to use this for. However I do have C-19, so am bored off my nut isolating, I'm also missing a shooting night at the club, which has got me super pissed, so I'm trying to put my energies into research for reloading, as well as some dry firing training

Anyway, my list so far consists of:
press
shell plate
carbide die set (intending to load pistols rounds)
auto disk powder measure
bin to catch the made rounds


I have a case tumbler and ultra sonic cleaner as well as a single stage press for de-priming.


Also, for safety etc, I am a probationary member of a club, and once full member, I'll be putting in for my variations to enable me to reload (.44 for now, maybe .357/.38 later), and an experienced club member has offered to show me the ropes, so that I don't blow my, or other members' heads off.

Any parts that are required would be good to hear, as it will save me money on postage if I can put a big order in.

Of course I have not included the vital components, the bullet and cases, where do you prefer to go to purchase these, local rfd or online?

Atb,
Danny.

[zanes]

Bullets- Kranks or shell house for these sorts of bullets- cast lead only, no point spending £££ for jacketed.

Cases- Ad on here for them. These sorts of rounds case life is virtually indefinite.

As to what else to buy (just things that spring to the top of my mind):
Scales- Ive always used electronic and my last set are off Amazon for a fraction of the price of a unit that says "shooting" on the side. Always, always check at least some metered charges, especially when setting up. I'd weigh every charge initially, just while you're getting familiar.

Calipers- for checking case length

Case trimmer of some description. I've got a Lyman universal and I'm not that Impressed with it, I fancy trying a Lee tool sometime instead.

Priming tool- I've never got on well with "on press" priming, whether single stage or progressive. My favourite is the Lee hand primer, think they're on a new version now

Case block

Powder funnel

Books:
At least one data book

Personal recommendation from me is the "ABC's of reloading"- I'd get that now off Amazon and read through it, a superb primer to the actual "how tos" of reloading. I'd also use the press in single stage, batch mode at first.

[DannyT]

Bullets- Kranks or shell house for these sorts of bullets- cast lead only, no point spending £££ for jacketed.

Cases- Ad on here for them. These sorts of rounds case life is virtually indefinite.

As to what else to buy (just things that spring to the top of my mind):
Scales- Ive always used electronic and my last set are off Amazon for a fraction of the price of a unit that says "shooting" on the side. Always, always check at least some metered charges, especially when setting up. I'd weigh every charge initially, just while you're getting familiar.

Calipers- for checking case length

Case trimmer of some description. I've got a Lyman universal and I'm not that Impressed with it, I fancy trying a Lee tool sometime instead.

Priming tool- I've never got on well with "on press" priming, whether single stage or progressive. My favourite is the Lee hand primer, think they're on a new version now

Case block

Powder funnel

Books:
At least one data book

Personal recommendation from me is the "ABC's of reloading"- I'd get that now off Amazon and read through it, a superb primer to the actual "how tos" of reloading. I'd also use the press in single stage, batch mode at first.

Many thanks for your detailed reply, really helpful and much appreciated.

Great advice too re taking it slowly at first, I'll definitely be doing that.

Got the ABC book on order now, so thanks for the tip!

[lightning22]

Welcome to the rabbit hole....

I’d have put a decent manual at the top of the job list too.

For cast I’d make sure you have a decent chamfer to to prevent you peeling bits off your cast bullets, I’ve always found the Lee dies more than adequate and the collet crimping die excellent. The Lee case trimmer is simple and works, you can also mount it in an electric drill if you have much to do, but usually a quick spin in the fingers will sort it.

[DannyT]

Welcome to the rabbit hole....

I’d have put a decent manual at the top of the job list too.

For cast I’d make sure you have a decent chamfer to to prevent you peeling bits off your cast bullets, I’ve always found the Lee dies more than adequate and the collet crimping die excellent. The Lee case trimmer is simple and works, you can also mount it in an electric drill if you have much to do, but usually a quick spin in the fingers will sort it.

Thanks, it does appear to be a real rabbit hole!

Re the case trimmer, I found this one online, it appears to go into a press:

https://www.reloading.co.uk/lee-quicktrim.html

Is that the one you are referring to?

Or is there something else?

Thanks

[lightning22]

Thanks, it does appear to be a real rabbit hole!

Re the case trimmer, I found this one online, it appears to go into a press:

https://www.reloading.co.uk/lee-quicktrim.html

Is that the one you are referring to?

Or is there something else?

Thanks

Hi,

I’ve never used that version, I use this

https://www.sportsmanguncentre.co.uk...-and-lock-stud

And then you add the calibre specific kit like this

https://www.sportsmanguncentre.co.uk...d-shell-holder


I’m not massively keen on the Lee chamfer tool, the Lyman one works well for me

https://www.sportsmanguncentre.co.uk...-very-low-drag

[rapidboy1]

Check load data from at least two sources

Calipers, digital are easier.

Scales, again digital are easier / quicker

Kinetic hammer or puller

A good solid and clear bench with good light and no distractions.

Loading tray, can be an old cartridge box.

Pen, paper, labels, make a list, take notes and label your reloads

Starting out keep it simple, only load a few and test.

Check and double check, take your time

Starting out i would weigh every finished round.

First shots, a double charge you will know about but squibs are easy to miss.