HW break barrel quick change pivot pin?

[averageplinker]

Hi all,
I am certain such a thing exists, however my internet browser doesn't agree? Please help me to find such a thing!
Cheers Rich.

[Barryg]

Hi all,
I am certain such a thing exists, however my internet browser doesn't agree? Please help me to find such a thing!
Cheers Rich.

V-mach and Terry Robb

[junglie]

Someone on this forum made me one for a fwb124 I had, that's had it's original replaced with a nail(not by me!). It was allen head on both ends(locking screw inside the pin & very well made.But I forget who unfortunetly.....sure he used to do them for hw's too?

[vestlenning]

google => "shauny qr pin".

[p.j.]

I have a Shauny made one for a HW77 (undrlever pin). As far as i know he still has some for the HW80. They are different design to the Venom, he makes them with a groove at either end and a pair of c clips to hold. The Venom ones are a hollow threaded pin with a small M3 (from memory) countersunk screws in either end. It is possible to use the old pin in this way, drilled out, tapped, and add the countersunk screws.

[Blackmax]

A second for the Shauney ones, very well made.

[Trumpetier]

I have a couple of pins from Shauny, great bit of kit

[wil95k]

i use roll pins,much cheaper solution

[Trumpetier]

i use roll pins,much cheaper solution

How tight ? to be fare I have used the roll pin method in my 99, long before I got the quick release pins

[lensman57]

Hi all,
I am certain such a thing exists, however my internet browser doesn't agree? Please help me to find such a thing!
Cheers Rich.

You can get from V Mach. The only problem is getting the old one out in one piece.

A.G

[averageplinker]

Thanks for the help chaps. It seems T R Robb's are the easiest to track down so will give them a go.
Rich.

[original45]

Thanks for the help chaps. It seems T R Robb's are the easiest to track down so will give them a go.
Rich.

Let us know how you get on with Terry pin. I have the old venom type myself but may need another and considered terrys.
Good luck.

[averageplinker]

Will do

[peddy]

Ive also used sellock roll pins on various break barrels, but never on a hw, I love messing with the shims too much.

[vestlenning]

Messing with shims maketh the man ...