original mod 50 T01

[wil95k]

Press it out through the transfer port ?

Industrial puller with hydraulic collets ?

Saw off barrel and bore it out ?

Then when it's replaced you have to machine the barrel breech to fit the loading tap without touching the existing !

Have a go !

That's way over my ability

[crowbar]

Make a tank then it's a lot easier !

[wil95k]

pen rwdan

[crowbar]

It's amused me, you need a fishing/shooting holiday somewhere quiet .

[wil95k]

It's amused me, you need a fishing/shooting holiday somewhere quiet .

I wonder this will be deleted tomorrow? hic! hic! time for bed methinks

[crowbar]

Take the holiday Bud, It was a stupid question .

[dvd]

Make a tank then it's a lot easier !

Exactly.

[wil95k]

Exactly.

That would mean me getting someone to make me one,and extra burners,more cost.It was just a simple question if it can be done.Jees!

[deejayuu]

Hm! Rattled my bin lid now. Will have a look at ours but may be different to TO1. What say you 'Wil'

[Geezer]

Hm! Rattled my bin lid now. Will have a look at ours but may be different to TO1. What say you 'Wil'

That’s a regular 50, not a T01.

[crowbar]

If you have anything to say put it on open forum not p.M.

[deejayuu]

Looks simple enough on ours. Two 3mm pegs, soft enough to drill, to register and fix the, probably, interference fit barrel.
As said, don't know if TO1 is same.