Dg 2.0 (airgunaid)

[tom24]

HI ALL
FOR SALE DG 2.0 (AIRGUNAID / DON GREY)
1980 s project by Eddie Barber and Don Grey
Complete with VIKING SCOPE and mounts possibly original to the gun
Been after one for years but cannot get on with the G80 floating trigger unit
£360.00

https://1drv.ms/u/s!AuiyEO9szf69hxbr...o7ygz?e=QqjlHw

[tom24]

Bump please

[junglie]

HI ALL
FOR SALE DG 2.0 (AIRGUNAID / DON GREY)
1980 s project by Eddie Barber and Don Grey
Complete with VIKING SCOPE and mounts possibly original to the gun
Been after one for years but cannot get on with the G80 floating trigger unit
£360.00

https://1drv.ms/u/s!AuiyEO9szf69hxbr...o7ygz?e=QqjlHw

I shimmed out the side play on mine with small washers & polished the sears slightly, made a good improvement to it, first gun i tuned to the eddie barber article in airgun world, turned out well but it'll never be a record. Good luck with the sale.

[tom24]

Thanks Junglie
I m going to withdraw it from sale for now -try and shim the trigger and see if I can get to love it
Regards TOM

[junglie]

Thanks Junglie
I m going to withdraw it from sale for now -try and shim the trigger and see if I can get to love it
Regards TOM

Good luck, think i used nylon electical insulation washers i picked up somewhere for the inner trigger parts & thicker steel ones between the cylinder & housing. It was very accurate afterwards compared to my mates airsporters etc.

[tom24]

Many thanks again
tom

[junglie]

Many thanks again
tom

Good luck they have very good 5.5mm barrels shoot ftts etc very well as i remember mine had a very pleasant shot cycle & for a tenner with broken front stock mounting holes was an absolute bargain giving me many years of use till i sold it for £20 to fund my first innova.