Reply With QuoteI have a 4mm slide hammer with a screw point I use to remove pellets.
A lot safer than heating to melt out the lead.
Registered User
Hw 110 barrel removal
Can anyone please throw some light on how to actually remove the barrel from a hw110.
The action is stripped down and he has asked me to help by finding out this information.
Someone (i wont be mentioning any names) has jammed a barrel up with multiple pellets and its going to need to be heated up to remove the lead.
He cant heat it up whilst in the plastic action so any help or advise is welcome.
Maybe next time he wont lend it to his "friend".
If this post isnt allowed, accept my apologies in advance and please delete.
Registered User
I have a 4mm slide hammer with a screw point I use to remove pellets.
A lot safer than heating to melt out the lead.
Repariere nicht, was nicht kaputtist.
Registered User
Think there's a screw from under neath by the transfer port. Can be seen when cylinder removed.
Registered User
All sorted now, barrel removed, pellets dislodged and barrel refitted.
Thanks for the advice guys
Registered User
How did you remove it please?
Posting Permissions