Hornet cases should be 19 thou too small head diameter, 24thou too small rim diameter and 13 thou too thick rim thickness.
Mr Nonte's book says don't expand the head diameter by more than 15 thou. Doesn't look like .22 hornet are any good
Registered User
Hornet cases should be 19 thou too small head diameter, 24thou too small rim diameter and 13 thou too thick rim thickness.
Mr Nonte's book says don't expand the head diameter by more than 15 thou. Doesn't look like .22 hornet are any good
Registered User
.32 acp is close i think and has a rim.
This year will go down in history. For the first time, a civilized nation has full gun registration. Our streets will be safer, our police more efficient, and the world will follow our lead into the future! Adolph Hitler – 1933
Elvis Floppyfeet
if you need to trim the rim thickness without a lathe then try this...
place a well fitting dowel in the case mouth and insert into a pillar drill
bring up the drill base plate so it steadys the case when spinning
now using a hacksaw blade trim the rim from the front side until you reach the correct thickness
email...... stephenbarrow@ntlworld.com
Registered User
I beg to differ. The 32acp or 7.65 browning chambers on the case mouth like the 9mm does. I had one in the happy days in the eighties (Walther PPK German army issue). No rim.Originally Posted by waterford103
[I]DesG
Domani e troppo tardi
Registered User
Again Ibeg to differ , .32acp has a rim albeit a semi rim , I have a bag of new brass in front of me and have measured it .
This year will go down in history. For the first time, a civilized nation has full gun registration. Our streets will be safer, our police more efficient, and the world will follow our lead into the future! Adolph Hitler – 1933
Elvis Floppyfeet
https://en.wikipedia.org/wiki/.32_ACP
email...... stephenbarrow@ntlworld.com
Registered User
OK, we'll split the difference at "semi-rim"
[I]DesG
Domani e troppo tardi
Posting Permissions
Reply With Quote