I have recently bought a Remington express. I have measured the transfer port at 4mm.
This seems a little big.
It is in .22 cal.
How big is yours?
Repariere nicht, was nicht kaputtist.
unless it shorter than about 6mm, it;s too big
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
Length must be near 15mm.
I have sleeved mine down. Its currently at 2.5mm, not easy to drill it out with the cylinder forks. I now have a 3mm drill bit in an extension bar.
Repariere nicht, was nicht kaputtist.
Copied off a Diana 34 I reckon.
Plinkerer and Tinkerer
I would be careful and double check the transfer port is bored straight and not dog legged before drilling out or it could cause you a headache bud.
The transfer port is straight, angled from the centre of the compression chamber upwards towards the breech.
There is no dog leg in this one.
Thank you for your cautionary warning.
Repariere nicht, was nicht kaputtist.
.22 Venom Mach 1 (FAC) 6-25x56 Millett.
.22 Venom Mach 2 Thumbhole 6.5-20x40 Leupold EFR.
.22 Venom Mach 2 Sporter 4-12x40 Leupold.
.177 Venom Vantage 4-16x50.
.177 Venom Daystate 8-32x56 AGS.
.22 Venom Datstate 4-16x56 AGS.
.22 Webley Venom FX2000 6-18x40 Busnel Legend.
.177 Titan MPT by Steve Pope 6-24x40 Tasco.
.177 Pro-Sport 4-16x50.
.22 Webley FX2000 3-9x33 Leupold EFR.
.177 Logan Solo 4-16x50.
.22 HW90 (spring powered) 4-16x50
.22 Gamo Stutzen.
.177 Walther lever action.
.22 Venom Mach 1 (FAC) 6-25x56 Millett.
.22 Venom Mach 2 Thumbhole 6.5-20x40 Leupold EFR.
.22 Venom Mach 2 Sporter 4-12x40 Leupold.
.177 Venom Vantage 4-16x50.
.177 Venom Daystate 8-32x56 AGS.
.22 Venom Datstate 4-16x56 AGS.
.22 Webley Venom FX2000 6-18x40 Busnel Legend.
.177 Titan MPT by Steve Pope 6-24x40 Tasco.
.177 Pro-Sport 4-16x50.
.22 Webley FX2000 3-9x33 Leupold EFR.
.177 Logan Solo 4-16x50.
.22 HW90 (spring powered) 4-16x50
.22 Gamo Stutzen.
.177 Walther lever action.