Results 1 to 3 of 3

Thread: Brocock Atomic .22

  1. #1
    Join Date
    Jun 2015
    Location
    wigan
    Posts
    123

    Brocock Atomic .22

    Anybody know how to separate the breach block/barrel assembly from the air cylinder?
    Mine is an early one without the threaded barrel for attaching a moderator and I want to machine the barrel.
    Air Arms HFT 500. HW100 FSB. HW99 (.22) HW99 (.177) HW30 (.177) HW97K (.177) Gamo GX40 (.22)

  2. #2
    Join Date
    Mar 2011
    Location
    loughborough
    Posts
    838

    Barrel removal

    You will have to tackle the anti tamper but also a cross pin under the plastic pellet trough and if it is glued in you
    cannot use any heat as the plastic pellet trough MELTS!

  3. #3
    Join Date
    Mar 2011
    Location
    Sheffield
    Posts
    2,461
    As above - be warned, I have seen the procedure go very wrong indeed!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •