Results 1 to 2 of 2

Thread: Bell Target setup

  1. #1
    Join Date
    Jan 2016
    Location
    Selby
    Posts
    424

    Bell Target setup

    Hi all!

    Other than City air weapons, is there anywhere else you can buy a “proper” bell target setup? As in with cord reset and a scoring faceplate?

    Thanks, Tom
    Slightly obsessed with Single Stroke Pneumatics
    Also making stocks over at Daviesbuilt gunstocks.

  2. #2
    Join Date
    May 2022
    Location
    Farnham
    Posts
    3
    Quote Originally Posted by tomdavies9 View Post
    Hi all!

    Other than City air weapons, is there anywhere else you can buy a “proper” bell target setup? As in with cord reset and a scoring faceplate?

    Thanks, Tom
    Hi Tom,
    I've also looked around for a proper bell target and drew a blank.
    I have found faceplates, bell and 25mm spinner online and plan to build my own.
    The design will have the spinner behind the 3/8" hole taking the pellet impact and acting as the striker on the bell.
    To further signal a 5 score I will drill a small hole in the bottom of the spinner and have light weight line (fishing line) attached with feather or similar hanging below the target. Movement of the spinner will be signalled by the indicator.
    I am sure others have come up with better ideas over the years?
    Last edited by Mike Ra; 29-11-2022 at 06:22 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •