Results 1 to 14 of 14

Thread: Diana Model numbers.... not even including "original" and "Diana"

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jul 2012
    Location
    cambridge
    Posts
    909
    Tha Diana 27 certainly did come in a variety of guises over the years. I've fired a fairly early model 27 dating from before 1939. It was a quarter stocked variant with clear sights single stage trigger & very well made. It happily grouped within an inch at around 15 yards & was very smooth to cock. No idea what the velocity was but if I had to guess I'd say it was probably around 500-550 fps (177) I have also fired a later half stocked Diana 27 with the double pull trigger which I think was as good as any from that period, & possibly better than most too. Once again build quality was very good & the general ergonomics were right for me. Possibly no more accurate than the earlier one but the trigger made it easier to shoot, so it fealt more accurate if that makes sense. I also fired it more than the quarter stocked one too, & it was probably about the same power but neither had been overhauled with new seals or springs so it might not be a very fair comparison.

    As for spares I really don't know what's available, I'd guess springs & seals are probably easy enough to come by but other bits would be as & when if you are lucky.

  2. #2
    Join Date
    May 2010
    Location
    Bamber Bridge
    Posts
    1,284
    Thanks for the help Evert and Trajectory. There are so many different variations that it will be a case of buying one when it turns up. The quarter stock version really does interest me though I had no idea that they were made in different places and over a long stretch of time.
    I will dig the 46 out but I think its beyond my meagre skills... it really was used to prop a door open! (thats how I came across it many years ago now). Probably for somone with a deep love of Diana Milbro to have a go at.
    Thanks again for the help- my list of rifles to obtain is getting longer.

  3. #3
    Join Date
    Jan 2012
    Location
    Knoxville Tennessee USA
    Posts
    392
    The very first "sticky" above, has links to all three of Garvin's beautiful "Airgun Collector" magazines. Issue no. 1 contains an article on the model 27.

    Names you might encounter on post-war German-made D27's include: Beeman's Original 27, Beeman 100, Diana 27, Gecado 27; Geco 27, Hy-Score 807, Original 27, RWS 27, and Winchester 427 (whew!).

    I too have a "thing" for the little fellows, and am happy to help with questions, either here or via PM.

    Last edited by MDriskill; 06-12-2022 at 01:52 PM.

  4. #4
    Join Date
    May 2010
    Location
    Bamber Bridge
    Posts
    1,284
    Driskill your photo nailed exactly what I was having a mini rant about-there are so many! Every time I looked in the Blue Book or online I never seemed to see the same model twice! I particularily like the quarter stocked rifle which has that "period" look captured by early BSA and Webley models.
    I must compliment you, if those are your collection then your dedication is faultess. I may have a Milbro one or parts of one kicking about, its a strange thing how ones tastes change, just a few years ago I would not have given the 27 a second glance but now I find them a very worthy rifle indeed. In fact with so many different manufacturers I can understand your fascination with them... I cant think of any other design being so widely copied though the Gamo 440 has a fair few imitators!
    Thanks for sharing the pic I have duly saved it for future reference and I will before the end of 2023 have at least one Diana 27 in my collection. This thread may well be resurrected after the first purchase

  5. #5
    Join Date
    Jan 2012
    Location
    Knoxville Tennessee USA
    Posts
    392
    Thank you for the kind words! If you will forgive more self-promotion, this old thread starts with my descriptions and photos of several of these, followed by much great info from others:

    https://www.tapatalk.com/groups/amer...lls-t4916.html

    The most noticeable change in the postwar German 27, was adding the aperture sight / scope rail in the early 1960's. While this was accompanied by some cost-saving changes (stamped instead of solid trigger blade, simplified machining in some areas, ball-bearing vs. wedge breech latch), there were also significant improvements (tunnel front sight, click-adjusting rear sight, and improved breech design, in addition to the rail). These newer ones are naturally more common, and the most versatile shooters.

    Enjoy the hunt!
    Last edited by MDriskill; 06-12-2022 at 04:50 PM.

  6. #6
    Join Date
    May 2010
    Location
    Bamber Bridge
    Posts
    1,284
    The link is VERY interesting and I will return to it again and again I am sure so thanks for including that. The aluminium trigger rifle has a beautoful stock! I must say the quality appears high even on the 60s Milbro versions of the rifle with locking screws on the breech.... something missing from the Meteor which musy have been a competitor to this gun. Thanks again for the information...I am saving almost every pic for reference

  7. #7
    Join Date
    Feb 2014
    Location
    Chelmsford
    Posts
    448
    If you are thinking of buying a model 27 you will not be disappointed - they are really lovely guns and an absolute joy to shoot. I bought one about fifteen years ago from Protek date-stamped 1958.

    Over twenty yeas ago I was sold an (earlier) mod 27 which, having just seen this thread, I dug out but now cannot see a model number on it so am not sure if it is actually a 27. It is identical in appearance to the top one in Driskill,s pic although not in such nice condition - all the metal work being slightly pitted, but stamped on the barrel just in front of the rear sight and clearly visible is "DIANA-LUFT-GEWEHR". Also it has a metal butt-plate so the date mark usually on the butt isn't there. It has a single pull trigger and the breech seal is not fitted to the barrel breech but is fitted into a groove at the front of the air chamber and it still makes a perfect seal. However, as I said earlier there is no sign of a model number either on the barrel, air chamber or around the cocking linkage area, so a bit of a mystery!

    Aubrey

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •