45,s are very hard to master in my experience . But it could be just me
45,s are very hard to master in my experience . But it could be just me
LOOKING FOR A BSA ULTRA IN .177 and .25
Yes have read here and there difficult to manage but I m surprise with very poor group.
Dirty barrel would be my best guess, chronograph it, and if power is consistent that rules out broken spring/guide (which would be next best guess)
Or.... loose rear sight blade? They are prone to being bumped or moved due to the over lever cocking action
TX200 .177 21mm TL | TX200HC .22 22mm TL | Prosport .22 22mm TL
HW40 | HW45 | Diana Mod5 | Webley Senior....... Because PCP is like kissing your sister (apparently)
If they were made by anyone else they'd be a pig to shoot but as it's a hw it's just hard to master.
is the piston crashing / slamming when shot, ie very harsh cycle ? Ausie seal helps a lot. Also push a pellet through the barrel and check it's not coming out deformed ? Breach seal making good contact ? crap in the barrel ?
if it's mechanically OK... you need to hold it softly - when "resting" hold the pistol and rest your forearms on the rest, not the gun.
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
I'd put a stock on it.
HW 77K .22,Gammo Hornet .22 BSA 3-9 x 50 Night light ,HW 40 .177,Gamo Maxxim Elite .22 multi shot, Beeman P17 .177 red dot sight ,SMK CP2 co2 with Hawk 3-9 x 50.Slingshots PPMG+TTF PPMG mk 2 ott PPMG ott Original custom made solid Bronze, Number 15 of 20
Exactly this!
Spring pistols generally cant be "rested", but you can rest your arms, being careful to have your wrists and hands free.
Then you need to develop a consistent soft hold that lets the gun recoil naturally. It it just like with spring rifles, only more critical.
Too many airguns!