Hi guys. Sometime In the new year I'm thinking of replacing the stock regulator In my 12 ft/1b Artemis M16 with a preset Huma regulator. This Is mainly because the stock regulator Is set at a ridiculous high setting of about 150 bar. This In turn obviously gives me less shots per charge than a regulator would with a much lower setting.
And as I'm not really that handy or experienced at stripping down and working on PCP's I have a question please.

And my question Is :

Once the new Huma regulator has been Installed and had been preset by Huma at about 95 bar, would the current power level of M16 be the same as It Is now or would I probably need to adjust the hammer spring tension? And If I would need to adjust the hammer spring tension, would It likely be higher or lower than It currently Is?

Cheers lads.