Results 1 to 14 of 14

Thread: After market air arms magazines

  1. #1
    Join Date
    Nov 2004
    Location
    pontefract w.yorkshire..
    Posts
    282

    After market air arms magazines

    Anyone used the £20 after market air arms s410 ect magazines
    Any good??
    Thanks

  2. #2
    Join Date
    Nov 2004
    Location
    pontefract w.yorkshire..
    Posts
    282
    Advertised on evilbay

  3. #3
    Join Date
    Jul 2016
    Location
    DE7
    Posts
    457
    I tried them once. the locking tab on the rear of the mag broke on the 2nd use. I got a full refund from the seller.
    Bob

  4. #4
    Join Date
    Mar 2010
    Location
    mountain ash
    Posts
    8,630
    Not used air arms ones but others ive used have been rubbish,

  5. #5
    Join Date
    Mar 2009
    Location
    THAME, ENGLAND
    Posts
    1,771
    I used CARM on a .22 Artemis P15, huge improvement, HIGHLY recommended
    Pick up your gun, shove a bullet up the spout
    It's the Major Dennis Bloodnok Rock'n' Roll Call Tango

  6. #6
    Join Date
    Jun 2011
    Location
    middlesbrough
    Posts
    8,836
    You can get genuine secondhand AA ones for £20 , personally I would stick with them.
    LOOKING FOR A BSA ULTRA IN .177 and .25

  7. #7
    Join Date
    Mar 2009
    Location
    durham
    Posts
    3,459

    After market air arms magazines

    Quote Originally Posted by Trumpetier View Post
    You can get genuine secondhand AA ones for £20 , personally I would stick with them.
    i agree if they were better or even as good might be worth a punt but plenty secondhand AA mags around.

  8. #8
    Join Date
    Sep 2010
    Location
    Exeter
    Posts
    35,743
    I've got an SMW Rapid mag, works well enough but a fraction thicker than a std mag, so the barrel can only be set-up for one or the other, I'm using std ones.

  9. #9
    Join Date
    Mar 2010
    Location
    mountain ash
    Posts
    8,630
    Quote Originally Posted by angrybear View Post
    I've got an SMW Rapid mag, works well enough but a fraction thicker than a std mag, so the barrel can only be set-up for one or the other, I'm using std ones.
    I've got about 12 rapid mags which are original but some are slightly difference in size, The 12 shot ones anyway. I assumed some were older ones , Anyway I use the Benjamin marauder mags and are great , Just need a little packing and front scope mount may need a little sanding but a little spray and you cant notice, They work faultlessly.

  10. #10
    Join Date
    Aug 2016
    Location
    Melton Mowbray
    Posts
    1,983
    Funnily enough I was looking at some 3d printed ones yesterday for a aa310.

    Really well made and rotate well. Unfortunately no makers name.
    Repariere nicht, was nicht kaputtist.

  11. #11
    Join Date
    Nov 2004
    Location
    pontefract w.yorkshire..
    Posts
    282
    Quote Originally Posted by Trumpetier View Post
    You can get genuine secondhand AA ones for £20 , personally I would stick with them.
    Happy to pay £20 for a genuine.177 air arms magazine if anyone has a spare
    Thanks

  12. #12
    Join Date
    Dec 2003
    Location
    Yeovil/Moreton in Marsh
    Posts
    12,907
    There are different materials that can be used and some printers are more capable than others. This equates to considerable variations in basic quality and longevity.

    Ya pays ya money and take ya chance
    In a battle of wits I refuse to engage with an unarmed person.
    To one shot one kill, you need to seek the S. Kill only comes from Skill

  13. #13
    Join Date
    Nov 2004
    Location
    pontefract w.yorkshire..
    Posts
    282
    Still wanting a spare 177 magazine if anyone selling them
    Thanks

  14. #14
    Join Date
    Aug 2015
    Location
    Millom
    Posts
    165
    Carm was mentioned. I was on their site yesterday trying to place an order (not Air Arms). I got a message telling me that, due to Brexit minimum orders to the UK are now 160 Euros!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •