reloading .22 hornet with sierra .224 45g 1210 and Alliant 2400 , think running 8.9 g
but lost the info/book had a clean out ta
Webley Tempest .22, BSA Lightning(delux) .22 ,HW 80 K .22 Sako finn fire .22rf, Browning Buckmark 22rf , BSA 22 Hornet centre fire ,Winchester s/a mod 1400 12 bore, Winchester select light 12 bore Master side bee side 12 bore and a 410 hushpower, BASC MEMBER
thanks forgot about them , sierra site wont give details , but found my old file says 8.4 , so will pull and weigh the charge
Webley Tempest .22, BSA Lightning(delux) .22 ,HW 80 K .22 Sako finn fire .22rf, Browning Buckmark 22rf , BSA 22 Hornet centre fire ,Winchester s/a mod 1400 12 bore, Winchester select light 12 bore Master side bee side 12 bore and a 410 hushpower, BASC MEMBER
If You still have some loaded rounds, just replicate them. Measure col, pull the bullet and weigh the powder. You can then make more the same.
Gordons reloading tool, its like a free quickload, so far I've found it very accurate
Do nothing, achieve nothing
email...... stephenbarrow@ntlworld.com
3 bed static at thornwick bay to let 2016....pm for details
i had a book it was only about 18 pages just for the .22 hornet , homegrown thrown together thing , but it was useful but ranged from 35g to 50g with lots of makers cast and jacketed gas checked , different propellants , i only home load .22 hornet now , there where pages and pages of stuff on line from the good old usa but now most are expired or removed , i found a scribbling on my shed after moving a box , on the wall with a few other details primer , and col and case length , and most important the charge ,powder and heads , , along side the 223/rem and 222 and 357 i have reloaded in the past so all good , so if you find a load put it somewhere you will find it when you have stopped looking !
Webley Tempest .22, BSA Lightning(delux) .22 ,HW 80 K .22 Sako finn fire .22rf, Browning Buckmark 22rf , BSA 22 Hornet centre fire ,Winchester s/a mod 1400 12 bore, Winchester select light 12 bore Master side bee side 12 bore and a 410 hushpower, BASC MEMBER