Results 1 to 5 of 5

Thread: Pcp won't charge past 100 bar

  1. #1
    Join Date
    Jan 2022
    Location
    Rotherham
    Posts
    23

    Pcp won't charge past 100 bar

    Hi ,Am using a 3ltr bottle,the bottle is charged I have checked it with a blancking plug,is it a part I can replace,thanks

  2. #2
    Join Date
    Jun 2012
    Location
    Exeter
    Posts
    277
    What pcp is it?
    When did it last fill above 100 bar?
    Where are you getting the 100 bar reading from, rifle or bottle?
    Does it sound like air is coming out?
    Can you fill other riles with the same tank above 100, or do you have a pump?

  3. #3
    Join Date
    Jan 2022
    Location
    Rotherham
    Posts
    23
    It's a webley raider12, have had the problem for quite a while, gun will charge ok with syrup pump.came to use it ,dial read empty,bottle would only fill to 100 bar,was using syrup pump gun dial was just about full when It started leaking near the magazine,and completely emptied.

  4. #4
    Join Date
    Jan 2022
    Location
    Rotherham
    Posts
    23
    Quote Originally Posted by Geetee View Post
    It's a webley raider12, have had the problem for quite a while, gun will charge ok with syrup pump.came to use it ,dial read empty,bottle would only fill to 100 bar,was using syrup pump gun dial was just about full when It started leaking near the magazine,and completely emptied.
    Gun filled ok at gun club

  5. #5
    Join Date
    Jun 2012
    Location
    Exeter
    Posts
    277
    Sounds like it needs a service/new seal kit at least.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •