HW80 adjustable cheek piece conversion.

[elewis411]

Hi guys, anyone on here able to convert an Hw80 standard stock to adjustable cheek piece for me please, I would obviously very gladly pay the going rate of course…Thanks…Lewis…

[Desmond.22]

Hi mate not sure if he is on here but there is a guy called nobby on other forum who is renowned for doing just this to high quality.

I nearly got a 77 stock done last year and was quoted around £100 ish plus postage

[Travis299]

This may or may not help but I needed a little height for my HW95L stock for scope alignment and added this leather cheek piece.

[T 20]

Hi mate not sure if he is on here but there is a guy called nobby on other forum who is renowned for doing just this to high quality.

I nearly got a 77 stock done last year and was quoted around £100 ish plus postage

This is Nobby :-

https://www.airgunbbs.com/member.php?72534-Rich

[Desmond.22]

This is Nobby :-

https://www.airgunbbs.com/member.php?72534-Rich

Great stuff

[Desmond.22]

You can also buy the slips that go over yue stock and you put different bits of foam in to pad them out.

Think more for shot gun but its a budget idea

[Bellycrawler]

Comb risers etc can be stick on, slip on, strap on. Some have ammo loops, some have pockets. Before you modify a stock find what you need done with a temp mock up & don't guess measurements. I used a slip on comb riser cheek piece with different size pads only to use lower scope mounts instead.

[elewis411]

Thanks everyone, some excellent replies as per usual and have sent pm to rich as I would like the full monty if possible…

[maximus]

You could always put the money towards a CS500, 80's look well in them.

[HW777]

This may or may not help but I needed a little height for my HW95L stock for scope alignment and added this leather cheek piece.

I had thought your cheek piece riser was made from Kydex

[Rog5]

You could always put the money towards a CS500, 80's look well in them.

Not adjustable though, so might not be any better off. Rog

[Murphy]

Not adjustable though, so might not be any better off. Rog

But its a lot higher.

[maximus]

But its a lot higher.

Indeed.

[Rog5]

But its a lot higher.

Objectives can vary by quite a bit, so an adjustable comb would be the way to go, and I did my 80 has one .Rog

[nishijin]

Bumping this, has anyone got photos of one done by Rich/Nobby? Interested in what the stock work looks like.

Edit: found a long thread on AGF