THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- May 17/18, 2025.........BOING!!
It's the Kit version so 12 inch screw cut barrel. Yes TonyL the little 30 has knocked my HW99PS tune off top spot. Mach 1.5
Haha! I knew it! A mildly fettled 30 can boast more impressive firing manners than many bigger, more expensive rifles with more technical tunes. The only compromise is the reduced power. But a fair few people have already proved its effectiveness at longer range targets at The Bash so, to me, it makes that power deficit far less of an issue than one might have thought. Shooting in very windy conditions at longer ranges will show the deficit up more, no doubt.
What a bloody wonderful little rifle!
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- May 17/18, 2025.........BOING!!
Well my .22 cal HW30 project arrived today. Interesting to see the DR signed stocks have a little more wood to them than the manelli marked stocks giving a little bit more of an adult feel to this little gem. Mach 1.5
Last edited by Mach 1.5; 05-12-2023 at 08:23 PM.
What have you got in mind for this one, Paul?
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- May 17/18, 2025.........BOING!!
Hi Tony. This one is a little rough and so it's for Lyn to use as a project for some of his new products he is developing. If all goes to plan i shall look at adding .22 cal to my collection in the new year. Mach 1.5
Last edited by Mach 1.5; 08-12-2023 at 06:40 AM.
Gotcha.
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- May 17/18, 2025.........BOING!!
The UK spec factory spring was used if i remember Pauls was doing about 8.6 with 8.44 JSB pellets. A kit was fitted to a second rifle and that have now fired well over 500 pellets im told its putting out 8.8 ft lbs. Im finding it hard to believe that the power increase on these rifles Pauls went from just about 7ft lbs to 8.5plus. I have now bought a new 177 to see what power i get with this one. im at the moment trying to get a higher quality spring but this will not be until the new year.
.22 Venom Mach 1 (FAC) 6-25x56 Millett.
.22 Venom Mach 2 Thumbhole 6.5-20x40 Leupold EFR.
.22 Venom Mach 2 Sporter 4-12x40 Leupold.
.177 Venom Vantage 4-16x50.
.177 Venom Daystate 8-32x56 AGS.
.22 Venom Datstate 4-16x56 AGS.
.22 Webley Venom FX2000 6-18x40 Busnel Legend.
.177 Titan MPT by Steve Pope 6-24x40 Tasco.
.177 Pro-Sport 4-16x50.
.22 Webley FX2000 3-9x33 Leupold EFR.
.177 Logan Solo 4-16x50.
.22 HW90 (spring powered) 4-16x50
.22 Gamo Stutzen.
.177 Walther lever action.
That’s really startling to get that energy level from a .177 HW30, they don’t get that with the very stiff Vortek spring. Is there a very thin piston washer involved or some other way the stroke is lengthened? I had a .22 that would do 9fpe with the very light Hobby pellets, and I thought that was the most one of these little guns would do, the most a .177 would be good for was a bit over 7fpe. Where has that extra power come from? Did you modify the transfer port? Or is that a trade secret?
Im finding it hard to believe that is why i have now bought a new 35s to see what the outcome is with that, im trying to do this before Christmas. I will be having a .22 cal to see what the outcome of that one is. I have not changed the stroke , fitted a V-Mach piston seal. ?
.22 Venom Mach 1 (FAC) 6-25x56 Millett.
.22 Venom Mach 2 Thumbhole 6.5-20x40 Leupold EFR.
.22 Venom Mach 2 Sporter 4-12x40 Leupold.
.177 Venom Vantage 4-16x50.
.177 Venom Daystate 8-32x56 AGS.
.22 Venom Datstate 4-16x56 AGS.
.22 Webley Venom FX2000 6-18x40 Busnel Legend.
.177 Titan MPT by Steve Pope 6-24x40 Tasco.
.177 Pro-Sport 4-16x50.
.22 Webley FX2000 3-9x33 Leupold EFR.
.177 Logan Solo 4-16x50.
.22 HW90 (spring powered) 4-16x50
.22 Gamo Stutzen.
.177 Walther lever action.