-
Bell target
Guys are there 2 types of bell target comps
I used to use my hw30 or hw77 with opens in the garage before it got converted. I had 6m and thought this was the rule. 6m back 5ft up.
At one of the shows it was much further than 6m
Cheers
-
No 6yds is the distance, 5ft high as you ay & a 3/8th or 9.57 mm hole. I shoot weekly with the Lincolnshire league
-
Some leagues are 6 yards, some 7 yards.
At a show they possibly had to set targets a minimum distance for insurance?
-
Historically 6yds. But as has been said some places used 7yds; these were usually where the tgt was at the end of a skittle alley which was 7yds. Confirm hole is 3/8" dia; then 1" dia for 4 ring; 2"dia for 3 ring; 3" dia for 2 ring. Plate 5" dia; there was no 1; so you go from 2 to 0. Height of hole centre 5 feet from ground.
Hope this helps.
-
Bell Target
Depends where you shoot the Bridgend and District shoot over 7 yards.
and have done since 1907
Jim
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules