Results 1 to 6 of 6

Thread: Compressor help

  1. #1
    Join Date
    Jun 2012
    Location
    barrow in furness
    Posts
    141

    Compressor help

    Hi all,

    I’ve recently bought a Katran C and am looking to buy a compressor to charge it and my 300 bar diving tank. I’m not wanting to spend a lot and was looking at the tuxing for around £160, can anyone recommend one around the £150-£200 mark? Ideally I need it to run from 240v and not just a 12v car battery. All help and advice appreciated.

    Many thanks
    EVEN A STOPPED CLOCK TELLS THE RIGHT TIME TWICE A DAY

  2. #2
    Join Date
    Dec 2011
    Location
    Bolton Lancs
    Posts
    1,989
    You will be lucky to find anything in that price range to fill a dive cylinder, Air rifle will be ok under 500cc but not a dive cylinder. Col.

  3. #3
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London
    Posts
    27,891
    Quote Originally Posted by colin g View Post
    You will be lucky to find anything in that price range to fill a dive cylinder, Air rifle will be ok under 500cc but not a dive cylinder. Col.
    agreed. and if you do, it's last about 5 minutes...

    I use my yong heng to fill a (300 bar) dive bottle to 230 bar. Still takes a little while, with a few cooling breaks, and I believe they are around £250-£300 new. I dont use much air over the course of a year so that works for me.

    If you really need 300 bar, and expect to fill it fairly regularly, you'll need to spend more.
    Always looking for any cheap, interesting, knackered "project" guns. But not lathes. I have too many lathes. Thanks, JB.

  4. #4
    PLAGUE is offline Nice to see you, to see you,,,,,,,Nice!!!!!!!
    Join Date
    Feb 2010
    Location
    Southport
    Posts
    986
    My Yong heng fills my 300bar 3ltr bottle from 210 to 300 bar not a problem - done that at least 50 or 60 times - i know i'm one of the lucky one's that got a goodun but don't rule out these yong heng's.

    Steve.
    PS - up grade the water pump and add a fan.

  5. #5
    Join Date
    Sep 2010
    Location
    Exeter
    Posts
    37,914
    There are some larger Chinese compressors, twin cylinder in a frame, starting around £300-£350, they sell for filling cylinders but only do around 50lpm & a 12l 300 bar is 3600L

  6. #6
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London
    Posts
    27,891
    Quote Originally Posted by PLAGUE View Post
    My Yong heng fills my 300bar 3ltr bottle from 210 to 300 bar not a problem - done that at least 50 or 60 times - i know i'm one of the lucky one's that got a goodun but don't rule out these yong heng's.

    Steve.
    PS - up grade the water pump and add a fan.
    I agree.. and I've added a fan, a cooling radiator, and exhaust rose (around the 2nd stage), cooling for the pipework, and an upgraded pump.. my point wasn't that the Yong heng is no good; quite the opposite, they can indeed do the job, but it's not a £150 pump as per the OP's budget.

    Always looking for any cheap, interesting, knackered "project" guns. But not lathes. I have too many lathes. Thanks, JB.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •