Results 1 to 3 of 3

Thread: Webley FX2000 Help

  1. #1
    Join Date
    Apr 2015
    Location
    Wrangle
    Posts
    221

    Webley FX2000 Help

    I want to change the Main Valve Seat inside the housing but can't see a way to get the old one out .I will be changing the Main Valve Stem too .
    Any ideas ?
    Many thanks .

  2. #2
    Join Date
    Jun 2012
    Location
    North Wales
    Posts
    3,326
    Three methods from valve end. Push a snug fit, softer, rod into the seat, wiggle and pull. Biro cap/body, etc.
    Threaded bolt, brass/alloy if poss. but not essential, tilt to snag and pull.
    Hooked rod end, sacrificial small screwdriver etc insert below seat , tilt and pull.
    From hammer end, insert rod/etc as before and push.
    They pop out quite easy usually

  3. #3
    Join Date
    Apr 2015
    Location
    Wrangle
    Posts
    221
    Got it out ! Many thanks .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •