.410 & 12g solids

[Pop Larkin]

Hi folks, anyone on here have any reloading data for the above please?

[tinbum]

Hi folks, anyone on here have any reloading data for the above please?

This probably won’t help, but I made a tool to cut the top roll off, I tip out the shot and pop a slug in. I use the Svarog mould and they are a snug fit, but a spot of hot glue holds any loose ones in place

With bulk boxes of steel carts this works out cheaper than reloading for me

[mag44uk]

If you are talking about solid slug then more info required.
I can give you my data but you wont have the powder I use or the slug!
Folkestone engineering have some 12g data.

[Pop Larkin]

Hi Mag44, what further info would you like mate

[springfieldm6]

This probably won’t help, but I made a tool to cut the top roll off, I tip out the shot and pop a slug in. I use the Svarog mould and they are a snug fit, but a spot of hot glue holds any loose ones in place

With bulk boxes of steel carts this works out cheaper than reloading for me

Do you re-crimp after loading the slug in, or is it not necessary?

[DesG]

I got a rollover crimp tool for both calibres off the bay for not a lot. They work very well, but I think they were made in Russia.

[jamesg]

I got a rollover crimp tool for both calibres off the bay for not a lot. They work very well, but I think they were made in Russia.

I sell 3D printed vices for holding cartridges while crimping, on the bay for all calibres. Can do people a deal if interested. just message me.

Jamesg666

[Pop Larkin]

I got a rollover crimp tool for both calibres off the bay for not a lot. They work very well, but I think they were made in Russia.

yeh got those, just need to find a source for the slugs and load data

[acmsarh]

What powders do you have available to use.

[angrybear]

Hi folks, anyone on here have any reloading data for the above please?

I feel obliged to point out all slugs are S1 & require FAC, although I'm sure you already know that.

Shot gun cartridges
2.57
A shot gun certificate is not required to possess or acquire shot gun cartridges containing five or more shot, none of which exceeds .36 inch in diameter. All ordinary shot cartridges are covered by this description. However, a shot gun certificate (or firearm certificate authorising possession of a section 1 shot gun) is normally required to purchase shot gun cartridges. All single bulleted ammunition, for example solid slug, spherical ball or projectiles for birdscaring equipment, is subject to the requirement for a firearm certificate.

[Pop Larkin]

I feel obliged to point out all slugs are S1 & require FAC, although I'm sure you already know that.

Shot gun cartridges
2.57
A shot gun certificate is not required to possess or acquire shot gun cartridges containing five or more shot, none of which exceeds .36 inch in diameter. All ordinary shot cartridges are covered by this description. However, a shot gun certificate (or firearm certificate authorising possession of a section 1 shot gun) is normally required to purchase shot gun cartridges. All single bulleted ammunition, for example solid slug, spherical ball or projectiles for birdscaring equipment, is subject to the requirement for a firearm certificate.

Yep I know that, had solids on my FAC, along with sec 1 shotgun for about 15yrs, just fed up paying mad prices for solid carts

[springfieldm6]

I feel obliged to point out all slugs are S1 & require FAC, although I'm sure you already know that.

Shot gun cartridges
2.57
A shot gun certificate is not required to possess or acquire shot gun cartridges containing five or more shot, none of which exceeds .36 inch in diameter. All ordinary shot cartridges are covered by this description. However, a shot gun certificate (or firearm certificate authorising possession of a section 1 shot gun) is normally required to purchase shot gun cartridges. All single bulleted ammunition, for example solid slug, spherical ball or projectiles for birdscaring equipment, is subject to the requirement for a firearm certificate.

Yep, I’ve slugs slugs on my FAC for .410 and 12G, but only use them in S.2 shotguns. That confused them…

[springfieldm6]

Some useful info here…..
http://four4islands.org/forum/viewtopic.php?t=42

[Pop Larkin]

Yep, I’ve slugs slugs on my FAC for .410 and 12G, but only use them in S.2 shotguns. That confused them…

How much are you paying for .410 solids?

[BC312]

In the old days, simple accurate .410 slugs where made from cutting the top of .410 Winchester super X emptying just the shot and fitting a .38 hollow base wad cutter into the plastic wad which gave a nice snug fit, not tight or lose. Accuracy good tight groupings at 50 yards with open choke.