Airwolf Silencer

[mattler]

I`m in the process of having an AWT silencer made for my Airwolf but also wanted to get one of the carbon silencers as a comparison then sell whichever one isn`t as good.
Problem is I cant find anywhere other than wighillparkguns that sells them and they are collection only.
I have found a similar silencer by logun but not sure if it will fit.
Any ideas if the logun 7" carbon silencer 1/2" would fit my Airwolf MVT??
It has the 1/2" adaptor fitted.
Matt

[markyboy]

if it has the 1/2" adapter then it should fit.
i have a john bowkett carbon fibre silencer on my airwolf and its very very quiet

mark

[mattler]

Would the shrouded barrel not cause a problem??
EG logun silencer? Would it fit?

[martyntin]

My mvt has 1/2" unf thread so most silencers just screw on including logun. jls have the carbon fibre silencer try them they advertise in all the mags.

[mattler]

Cheers guys

[Stormdancer]

Are any of the silencers you mention light enough to cause little P.O.I change as I like to shoot HFT without the silencer and put it on for hunting,I have a MK3.and an old HW silencer with the springs in, but is a bit too heavy so I have to used it without any internals which works suprisingly well,but not ideal.

[mattler]

Please excuse my ignorance but P.O.I??

[Stormdancer]

Please excuse my ignorance but P.O.I??

Sorry point of impact/zero drops with my heavy silencer.

[ranger02]

just asking when you remove the cap is there ment to be a spring inside the
barrel i have seen a pic that shows a spring mine just has baffile atached
to the cap may be a silly thing to ask but no one seems to know

[markyboy]

only thing inside my airwolf when the end cap removed is the baffles


mark

[ranger02]

only thing inside my airwolf when the end cap removed is the baffles


mark

cheers i was thinking i had lost some thing

nick

ps nice gun

[martyntin]

I dont think its the wieght of the silencer that changes the poi but how it changes the air flow out of the end of the gun so if you want to shoot with and without a silencer you need 2 different zeros. and with the mvt its not reccommended to remove the end cap as the chrono is at the end of the barrell and a lot of the earlier mvts went back to daystate through people messing and taking the end of to look inside. on the earlier standard wolfs though (i used to have 1 of these as well) its as markyboy says.

[markyboy]

cheers i was thinking i had lost some thing

nick

ps nice gun

thanks for that nick
i to thought i had lost something out of the end when i took my silencer off and the adapter came off with it.
but i asked on the forum and was told there is only the baffles in there

so your not the only one


mark

[Doug Knapp]

Isn't the compact carbon fibre moderator due to be launched imminently by Daystate?

Where's Sniper 22 when you need him?

[markyboy]

i read on the doc it was out in the next few weeks


mark