Unscrew the end cap and see it if has hair curlers in it.
I have a silencer on my Ultra, it looks like a Weihrauch mod, but then again the Swift also looks the same. Anyone know how to tell the difference visually ?
LOOKING FOR A BSA ULTRA IN .177 and .25
Unscrew the end cap and see it if has hair curlers in it.
Master Debater
This is in no way certain mate but... Swifts that I have seen are ‘flat’ at the ‘shooty end’ whereas Weihrauch’s that I own are kind of ‘pointy’ if you know what I mean. I’m sure someone will pop along here with a more sensible answer
HW77K .22, HW100KT .22, HW95K .22. AA TX200 MK3 .22. AA S410 MK3 .177. HW80 .25 HW30S .22. Pistols: Walther CP88 .177, Hatsan Mod25 Supercharger .22, HW45 Silver Star .177, Webley Alecto .177, SMK Victory CP2 .22
I have been told I have a swift silencer on my rapid if that's right then the swift is a bigger dia than the weihrauch.
mk2 rapid.22
Weihrauch unscrew with a 7mm hex key in the mod muzzle, don't know about the swift.
My hw mod has " nur fur luftgewehre" written on it near screw on end.
The silencer on my hw110 is curved on the end (convexed) and I'm pretty sure that my previous 100 was the same.
I have three Swift silencers two have a covexed end with a 7mm hex hole and a black satin finish
and measure 31mm dia ,200mm long .
The third one has a flat end with a 7mm round hole and a matt black finish
and measure 31mm dia ,170mm long .
HTH. Crowbar
So it seems visually, (model dependent) without measuring, they look the same.
LOOKING FOR A BSA ULTRA IN .177 and .25
There's a vid on youtube about fake swift mods & comparing the genuine one to my HW the taper on the Swift looks a lot longer at a gentler angle than my HW,
also on my HW both end caps have a glossier finish than the tube itself, where on the swift they appear to be the same finish.