Hi Martyn, not sure which bit you mean. The threads on the bottle or the part of the reg which the bottle screws in to?
Hi Chaps how much would a Bottle Inlet Adapter ? If it makes any difference at all its for a rapid with a standard reg and made by PhilD.
Regards
Martin
Regards
Martin
Last edited by Martin(rockape); 23-10-2018 at 08:01 AM.
Hi Martyn, not sure which bit you mean. The threads on the bottle or the part of the reg which the bottle screws in to?
Plinkerer and Tinkerer
Ahh, in place of the regulator then. There are fast flows which have nothing to impede the airflow and generally for Fac and then a similar looking thing but have "inserts" that restrict the flow of air into the block. I have a fast flow in the sales which I need to lower the current £40 posted asking price to get it sold.
Plinkerer and Tinkerer
They are also 2 different lengths so might not fit your stock or might stick out and look shit.
Master Debater
You can also have a bottle holder with one small hole In centre. In stead of having a reg.
Cheers fellas, when i put my bits and pieces up for sale i shall make sure it is easily identifiable. The rapid that i had it fitted to was regulated, it also has a tiny hole in it. This one cannot be used with an airgauge unlike tge one which was fitted to my rifle (no longer have it)
Regards
Martin
th way you have described it with the small hole in the side that is the reg.
MK1 7/12 14" CZ barrel. , Dustin mod.Kevg reg. Bb valve , titanium tube, bushy legend. MK2 177,Kevg reg.silent pip,MK4 trigger,Bucketboy shroud.ssg spring, Nikon monarch
For some reason i thought that the reg was inside the block, maybe I'm thinking of the valve stem, the bit with all the rubber washers on?
Regards
Martin
the valve is inside Martin the part you have described that screws into the block is the reg.mate
MK1 7/12 14" CZ barrel. , Dustin mod.Kevg reg. Bb valve , titanium tube, bushy legend. MK2 177,Kevg reg.silent pip,MK4 trigger,Bucketboy shroud.ssg spring, Nikon monarch
Give us a clue Martin, take a photo.
Bb
Looks like a reg body without a reg core, is there fine internal threads the opposite end to where the bottle fits? Is so it’s definitely a reg body.
Bb