Think there's one in sales under "Diana spares" or something.
I have a solid bipod here that came with one of the guns I bought some time ago but it has a wood screw type fixing clearly to fix to front of stock via a pre drilled hole etc.
However I seem to recall the availability of a similar styled threaded bolt that utilises the front stock fixing bolt point on the Diana sidelever series of guns. I've done a bit of searching around and can't find any source.
Anyone out there know if/where one can be got?
Thanks
Dave
Think there's one in sales under "Diana spares" or something.
Plinkerer and Tinkerer
Thanks both.
I suspect then that this threaded bolt would need to be purpose made for this bipod in that case.
I'm not willing to drill the stock so I'll put it away for another occasion.
Cheers
Dave
What Diana? I have a stainless steel front stock bolt for a diana 52 here that incorporates sling swivel stud. It was made as a prototype for a popular air rifle tuning company who haven't (yet) sent me a Christmas card this year. If it is of interest to you I would be happy to post it.
Good evening fella. I think all the side lever Diana's likely share the same front stock fixing screw/bolt? The gun in question I'm thinking of fitting the bipod to is a 56. Fairly sure the stock bolt is same 48/52/54/56. But I'll check on chambers in a mo.
I'll send you a pic of the bipod to stock fixing adaptor and see if you think yours would fit? If so I'd be more than willing to purchase the bolt you have there.
Thanks for your reply.
Dave
Hi Dave,
One of those HW100 aftermarket bipod stock bolts fits the 56... you can different length bolts from various sources.
Cheers,
Tim