S200 shot string please

[deejayuu]

Thanks for looking. Can anyone show/describe a shot string from a good unregulated S200 please? Got one which peaks around 100 bar which seems low.

[PaulH]

Hi I could only find one for ten shots I'm afraid, I fill mine to 190bar and usually get about 40 shots until it starts dropping off which is around 90 bar.

These are the last 10 from a 190 bar fill

Shot	Date/Time	Make/Model	Grains	fps	m/s	Ft.Lbf	Joules	Pellet Name	Caliber	Gun Make	Gun Model
1	20/12/2021 13:51	Air Arms S200 JSB Exact	8.442	731.2	222.87	10.02	13.59	JSB Exact	0.177	Air Arms	S200
2	20/12/2021 13:51	Air Arms S200 JSB Exact	8.442	732.56	223.28	10.06	13.64	JSB Exact	0.177	Air Arms	S200
3	20/12/2021 13:52	Air Arms S200 JSB Exact	8.442	733.92	223.7	10.1	13.69	JSB Exact	0.177	Air Arms	S200
4	20/12/2021 13:52	Air Arms S200 JSB Exact	8.442	733.92	223.7	10.1	13.69	JSB Exact	0.177	Air Arms	S200
5	20/12/2021 13:52	Air Arms S200 JSB Exact	8.442	732.56	223.28	10.06	13.64	JSB Exact	0.177	Air Arms	S200
6	20/12/2021 13:53	Air Arms S200 JSB Exact	8.442	730.52	222.66	10.01	13.57	JSB Exact	0.177	Air Arms	S200
7	20/12/2021 13:53	Air Arms S200 JSB Exact	8.442	731.88	223.08	10.04	13.62	JSB Exact	0.177	Air Arms	S200
8	20/12/2021 13:53	Air Arms S200 JSB Exact	8.442	733.92	223.7	10.1	13.69	JSB Exact	0.177	Air Arms	S200
9	20/12/2021 13:54	Air Arms S200 JSB Exact	8.442	733.24	223.49	10.08	13.67	JSB Exact	0.177	Air Arms	S200
10	20/12/2021 13:54	Air Arms S200 JSB Exact	8.442	729.17	222.25	9.97	13.52	JSB Exact	0.177	Air Arms	S200

[deejayuu]

[QUOTE=PaulH;8154012][COLOR=#000000]Hi I could only find one for ten shots I'm afraid, /QUOTE]
Many thanks. Excellent info. and looks like very good set up. Any idea what i) the ME is at 190 bar ii) TP setting iii) valve spring adjuster depth iv) hammer spring adjuster depth.
Sorry but very interested 'cos got one in bits at the mo'

[PaulH]

[QUOTE=deejayuu;8154089]

[COLOR=#000000]Hi I could only find one for ten shots I'm afraid, /QUOTE]
Many thanks. Excellent info. and looks like very good set up. Any idea what i) the ME is at 190 bar ii) TP setting iii) valve spring adjuster depth iv) hammer spring adjuster depth.
Sorry but very interested 'cos got one in bits at the mo'

Sorry mate I haven't got a clue when it comes to that side of things

[deejayuu]

OK and thanks again. Next time it's low on air would be interesting to me, to have an ME reading at 5/10 bar steps on the way up.
Only if convenient of course.