Originally Posted by
M4 Carbine
I'll dig the armourers manual out and try to come up with some suggestions for the trigger.
Weaker hammer spring looks to be all you can do, the disconnector spring doesn't seem to contribute to the recocking force like it does in an AR
I would buy 2 hammer springs, cut one down till it's starting to light strike, then cut the second one down not so far as the first. Keep the original as a spare.
I would be cautious about removing any coils from the mainspring. You are messing with the breech timing and can run into problems with feeding the first round when cocking manually.
I reckon you are right on inspecting the insides...I dont plan to mess with the mainspring but have ordered some spare hammer springs for experimentation purposes.....
The stock has gone back for replacement and should be coming home over the next 2 days
Gun control means using both hands.