-
Tempest Strip
Hi
I found Rob M 's reply in the following thread good enough to help me strip and lube my Hurricane.
http://www.airgunbbs.com/forums/showthread.php?t=336421
Mine was just over 2 ftlb. When I stripped it I found that the piston washer was a tight fit in the cylinder so I gently sanded some off till it held in place with a finger on the transfer port but slid down when pressure was released. When I got it back together it was a much healthier 3.6 ft/lb.
Good luck
Zyg
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules