Original 10M

[Joncaddy]

Hi, I have a problem with my Original mod 10M. The sear doesn't latch and hold. It's just been resealed, but while apart some of the trigger mech parts may have been incorrectly reassembled. It's not an adjustment issue and apparently nothing was worn. It breaks and seems to cock as normal, the sear engages but when the spring pressure is taken by the sear it lets go. I took off the grips and shroud and nothing (in my limited experiance) seems out of place or missing. All the parts and pins etc of the trigger and anti bear trap are present and in the correct position to the diagram. This model does have a lot of moving parts and it's a bit beyond me! Does any one have any experience /knowledge of the Mod10. Or could perhaps recommend a company/gunsmith that could go through this gun and sort what I'm sure is something fairly simple. Also just noticed, if I hold and cock the gun upside down? it does hold on the sear ond the trigger operates. But only releases intermitantly when pulled! Any advice would be apreceiated. Thanks John.