Webley Hawk improvements

[T 20]

Thanks! I remembered your Hawk-tuning Mick, just didn't know where to look..
I was hoping to make a guide without having to modify the rear plug, which seems a bit difficult on the Mk2, as the centering-thingy for the spring has a much larger diameter than the one that centers the rear guide on the later Webleys.

I had to machine a small jig from some 25mm ID pipe to hold the Hawk back block in the lathe, then I drilled and tapped the central arbour 5/16 UNF in order to screw the guide into.