-
Daystate Airwolf question.
Hello I have a question about a 2005. .177 cal. The barrel is enclosed in a tube that is some 3 inches longer than the barrel. There is an alloy sleeve with an 'O' ring that slides over the barrel, there are 2 compression springs joined by a round alloy block, one spring end fits over a spigot on the alloy sleeve , the end of the other spring finishes about 5/8" from the threaded cap that screws onto the tube that surrounds the barrel.
As the springs are free to float then can anyone please tell me if this is correct or is something missing?
Thank you.
All the best.
Geoff.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules