Worth a try is to lower preasure and see if you can possible remove dust of grit that's causes in the leak.
Best way to reduce preasure is to shoot off Air , then if ball is clean , try a quick blast fill.
Has worked for me in the past.
BOB/R
Hello to all,
I have 2 Rapid 400cc bottles that have recently started leaking, to different degrees.
I am aware I can return them to Theoben for service, but is there anything I can (safely) try first?
Thanks in advance for your help.
Richard.
Worth a try is to lower preasure and see if you can possible remove dust of grit that's causes in the leak.
Best way to reduce preasure is to shoot off Air , then if ball is clean , try a quick blast fill.
Has worked for me in the past.
BOB/R
as Bob said,
plus use the Theoben cap to seal it - more of a work around than a solution, but why not ?
Other point is that they can't leak on the gun, so if the bottle is only off when refilling, no big deal....
HTH - JB
Jon - unless its a MK 2 - then they will leak on the Gun.
hehe, sorry Pat,
didn't realise Deano was using an alias
He doesn't use it for shooting any more......
Makes a fortune blowing up baloons at kids parties though....
sounds about right - nice title BTW
Thanks for the replies chaps,I will have a play.