Originally Posted by
pirellip
Repeatability on Clicks – Using the same setup as above and assuming I have my scope zeroed to the zenith of the pellet’s trajectory, I then performed 30 elevation changes in the downwards direction (moving the POI down) each time bringing the turret back to its zero position (this simulates a FT match)
After several of these tests, I noticed that the reticle had lowered about 3/32 of an inch, or 3 clicks at 10 yards. Okay, but not exact like I’d hoped.
I then re conducted this test, but instead of just going back to the turret zero, I went turned in the upwards direction the same amount of clicks (so if I went 34 clicks down I’d go back to 0, then 34 clicks up, then back to zero and start my next elevation change). Using this method the reticle did not stray from the original POI.