airsporter
Paul.
If the steel threaded insert on the alloy trigger is not lose it should tighten up back in the same spot. The insert thightens up on a serrated face, so will notch round into different positions, alowing the trigger block to tighten up
in the correct or incorrect position.
With the spring and underlever removed just screw the trigger back
into place and ensure it tightens up in line, if it dont then the steel insert
has moved and will need adjusting by slacking of the nut and rotating it.
Mike.
Michael Bridgewood
For Sale: Webley Service Series 3, Pre War BSA.
Wanted: Webley Service MK11 Series 1 & 2