Page 2 of 9 FirstFirst 1234 ... LastLast
Results 16 to 30 of 126

Thread: A 'How to' guide to sharpening a knife the traditional way.

  1. #16
    Join Date
    Jan 2005
    Location
    Aylesbury
    Posts
    60,301
    Diamond stones are very harsh on the blade steel. If you want to preserve your blade for maximum life, whilst keeping it at it's sharpest, then I really would use something more traditional.

    Diamond stones are fine for plane irons and such, as they don't lose their flatness due to wear.

    Join the Free Speech Union
    ''All that is necessary for evil to triumph is for good men to glaze over and resume scrolling''.

  2. #17
    Join Date
    Oct 2007
    Location
    llanvihangel crucorney (near Abergavenny)
    Posts
    1,067
    been using diamond stones for years, never had a problem with them wearing blades out, used on my leatherman , which i use for work daily , and no probs at all , have also got some fancy knives for shooting, and as long as your sensible , gives a longlasting keen edge.

  3. #18
    Join Date
    Nov 2004
    Location
    Notts.
    Posts
    4,267

    Smile Leather strop

    Thank you Snock for a very informative post. Can I just add that instead of having a leather strop stretched tight to wipe the blade on I use a stropping board. This is a piece of leather glued to a length of wood, mine is about 2" square and 8" long with the leather glued on one face. I hold the knife and wipe the strop along the edge. Same result as a pukka strop but I find it easier with this tool if the blade is a bit long.
    Thanks again.

    Just got back from Spain and bought myself a little darling of a knife there. A Muelay Colibri. Fixed 2 3/4" blade with a 3 1/4" Bone handle. with brass bolsters. It's worth going on their website and having a look at it.
    When I die don't let my wife sell my guns for what she thinks I gave for them!!!

  4. #19
    Join Date
    Oct 2007
    Location
    Cotswolds nr cheltenham
    Posts
    0

    knife sharpening

    An old cobbler showed me a way to sharpen knives a long time ago. Simply buy some wet n dry paper P600 grade. Glue onto a piece of wood about 7-8 inches long 2inches wide. Use spray adhesive to stick it on.wet the sharpener and use as oil stone. Works a treat, my knives are extreemly sharp. Obviously you need to learn the knack. If your knife is new or been sharpened using another method then it will take time for this method to kick in. Keep everything almost flat. But not that flat it marks the blade above an eighth of an inch from the edge. At first you may give it a jolly good rubbing. That should last for a few sessions. Then you will notice something extreemly sharp emerging. Next it's little and often. Rather like a new willy.

    Ah! the most important bit, you must learn about the different concoctions of steel and other things used to make a blade. Some hold an edge-some do not.
    Last edited by christy; 27-01-2008 at 12:29 AM. Reason: forgot something

  5. #20
    Guest Guest
    I use a spyderco, Tri-angle Sharpmaker - simply superb.

    Comes with a video of how to use it, excellent bit of kit.

    Dave

  6. #21
    Join Date
    Feb 2008
    Location
    stoke-on-trent
    Posts
    229
    shhhhh secretly get a round file of good quolity and follow the flat of the blade both sides as close as posable and suchi sharp it....

    (secret sea baiting tip...but... WATCH YU FINGERS...it is a microscopic saw...)


    ohh...some blades actualy get a tiny wafer flake, if you look close you can often see two 'layers' where the blades been folded,some with an insert of harder metal...

    this type of sharp is for meat slicing...when you find the motion to go with it it visualy looks like an electric knife that actualy goes straight through..it feels like your not moving the blade...makes meat taist better if its fresh and cooked straight after.(hense the baiting tip for sea fishing..it produces where ever the fish baits been 'shushi' cut,the rest get nothing...gurnards love a long cube done in this fasion.)
    Last edited by Stoogey; 15-02-2008 at 03:10 PM.

  7. #22
    Join Date
    Dec 2007
    Location
    shepton mallet
    Posts
    306
    Over the years I have made a number of blades from lumps of vanadium-carbon spring steel and also some insanely strong prybars and punches. This involves forging, grinding and most importantly the art of heat treatment. Once the correct hardness is achieved I've found that coarse oil or water stones are the best first stage, a small amount of coarse silicon carbide on the oil stones speed things up a bit. The second stage goes to medium oil stone or medium ceramic water stone. The final stage is a fine ceramic water stone and a light brush with a WELL WORN diamond sharpening steel or a brush with a razor strop, depending on the purpose. The edges are usually RAZOR sharp depending on the quality of the steel. Sharpening angles are compound with hollow grinding done before heat treatment. The latest technology in carbon-chromium steels is producing some amazing blades, Spyderco being a well known make. My kitchen knives are J.A.Henckles stainless steel and hold an edge almost as well as carbon steel. 'ATS' stainless blades are also very good.

  8. #23
    Join Date
    Nov 2006
    Location
    Wigan/Iraq
    Posts
    967
    Quote Originally Posted by Peter Dunkley View Post
    Thank you Snock for a very informative post. Can I just add that instead of having a leather strop stretched tight to wipe the blade on I use a stropping board. This is a piece of leather glued to a length of wood, mine is about 2" square and 8" long with the leather glued on one face. I hold the knife and wipe the strop along the edge. Same result as a pukka strop but I find it easier with this tool if the blade is a bit long.
    Thanks again.

    Just got back from Spain and bought myself a little darling of a knife there. A Muelay Colibri. Fixed 2 3/4" blade with a 3 1/4" Bone handle. with brass bolsters. It's worth going on their website and having a look at it.
    i've just had a mooch online at those knives. lovely looking things arent they.
    Seems like you got a nice knife there.

  9. #24
    digitaldwarf's Avatar
    digitaldwarf is offline A big boy did it and he ran away!
    Join Date
    Mar 2005
    Location
    falkirk
    Posts
    1,867
    just anyone is unsure about how to strop a knife here is a video for you

    http://uk.youtube.com/watch?v=liKYctpdjC4
    DONT BEAM ME UP SCOTTY I'M HAVING A CR__.__..._......

  10. #25
    Join Date
    Oct 2004
    Location
    Blackwood
    Posts
    10,517
    Here's how ray mears does it http://youtube.com/watch?v=bQN4jcXDjbE

  11. #26
    Join Date
    Nov 2005
    Location
    Southport, Merseyside
    Posts
    9,821
    I have recently learnt how to put a convex edge on my Fallkniven. I then use the fine stones on my Spyderco to finish. The edge is sharp enough to shave with, and can slice through tissue that is held between finger and thum.

    Cam

  12. #27
    Join Date
    Oct 2006
    Location
    Twyning, Glos
    Posts
    815

    Thumbs up Spyderco Tri-Angle Sharpener

    A while back, my Dad asked for a Spyderco Tri-Angle Sharpener for his birthday. It's initially a bit daunting as it looks quite unconventional, but the performance is awesome. It puts a magnificent edge on a decent blade. My Leatherman is good, but I also have a Benchmade which is now seriously sharp.

    So good I just had to get one for myself...

  13. #28
    Guest Guest

    Thumbs up Good One Snock

    Pete well done for adding the video link to this thread!

    Dave

  14. #29
    Join Date
    Jan 2005
    Location
    Aylesbury
    Posts
    60,301
    Thanks Dave.

    It takes a while to develop the skill, but it's with you for life after that.

    Pete.
    Join the Free Speech Union
    ''All that is necessary for evil to triumph is for good men to glaze over and resume scrolling''.

  15. #30
    Jackel's Avatar
    Jackel is offline Welding guru and moderator to the stars
    Join Date
    Nov 2004
    Location
    Sunny saltburn n/e coast
    Posts
    40,196
    Heres a great PDF file on sharpening Thanks to Swat for the host
    The impossible I do immediately, miracles take 24 hours..



    NOTHING IS IMPOSSIBLE,IT JUST COSTS MORE

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •