Results 1 to 10 of 10

Thread: Webley Tempest Strip Down Guide

  1. #1
    PaulH is offline A hunky chunk ball of baldy luuuuurve.
    Join Date
    Mar 2007
    Location
    Bracknell Berkshire
    Posts
    1,590

    Webley Tempest Strip Down Guide

    I have just found my Tempest it used to be used for rat dispatch whilst fishing, I think it needs a damn good service and would be gratefull if any one can give me a link to a strip down guide

    Many thanks

    Paul
    .

  2. #2
    swinscoe Guest
    bump, im in need of one too..... anyone?? cheers

  3. #3
    Join Date
    Oct 2008
    Location
    Redcar
    Posts
    95

    Tempest Strip

    Hi

    I found Rob M 's reply in the following thread good enough to help me strip and lube my Hurricane.

    http://www.airgunbbs.com/forums/showthread.php?t=336421

    Mine was just over 2 ftlb. When I stripped it I found that the piston washer was a tight fit in the cylinder so I gently sanded some off till it held in place with a finger on the transfer port but slid down when pressure was released. When I got it back together it was a much healthier 3.6 ft/lb.

    Good luck
    Zyg

  4. #4
    swinscoe Guest

    Red face

    anyone know how to put the trigger back together, a spring came out etc, can't get it to cock and stay cocked, i know silly me but can anyone help??

  5. #5
    swinscoe Guest
    please does anyone know?? i bought this to get the girlfriend interested and have got a few empty drinks cans etc for her to shoot at, this was going to be done 2mz as a surprise.... i thought i'd strip and de grease and re lube it so its a bit better for her but now i'm struggling


  6. #6
    Join Date
    May 2006
    Location
    Portland Oregon, USA.
    Posts
    663




    Hope these help.
    Webley Vulcan .22, Webley Tempest .177, Beeman Kodiak .25, Beeman R9 .177, Weihrauch HW30 .177, Slavia 618 .177, Colt Commander .45ACP, Browning Hi-Power 9mm, Bushmaster AR-15 5.56/.223

  7. #7
    swinscoe Guest
    ahhh excellent i've got it sorted now and it cocks and fires etc, but that seal spring is in the wrong place where i put it but it still works

    i've given it a quick (lol quick ) strip, de grease and re lube..... fired it and it still wasnt too good, then changed the seal round where the barrel clamps down to, breech seal?? and its pretty good now

  8. #8
    Join Date
    Mar 2007
    Location
    widnes cheshire
    Posts
    2,579
    After reading this i have striped mine down ,is the piston seal supposed to have a split in it for ease of fitting or do i need a new one ,any help appreciated.

  9. #9
    Join Date
    May 2006
    Location
    Portland Oregon, USA.
    Posts
    663
    Quote Originally Posted by mr dink View Post
    After reading this i have striped mine down ,is the piston seal supposed to have a split in it for ease of fitting or do i need a new one ,any help appreciated.
    The piston seal does have a split in it by design.
    Webley Vulcan .22, Webley Tempest .177, Beeman Kodiak .25, Beeman R9 .177, Weihrauch HW30 .177, Slavia 618 .177, Colt Commander .45ACP, Browning Hi-Power 9mm, Bushmaster AR-15 5.56/.223

  10. #10
    Join Date
    Mar 2007
    Location
    widnes cheshire
    Posts
    2,579
    Quote Originally Posted by Vulcanator View Post
    The piston seal does have a split in it by design.
    bud.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •