Results 31 to 45 of 200

Thread: Idiots guide to classic airgun strips (pt 1)

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    ggggr's Avatar
    ggggr is offline part time super hero and seeker of justice
    Join Date
    May 2008
    Location
    Flintshire Ch6 sort of near bagillt
    Posts
    2,379

    An idiots guide to Bsa Meteor mk4 and mk5 strip (pt1)

    I think this applies to the Meteor mk3 version as well. The mk4 and mk5 versions mainly differ in that the mk4 has the single piece cocking arm and the longer slot in the stock and the mk5 has the articulated lever and the shorter slot. Sights differed a bit as well. Most pistons have the "keyhole" slot piston that the piston head slots into although some mk5,s Ive seen have the circlip set up like the scorpion. The front stock screws and the rear one are all 2BA thread. Later front screws are longerand will need cutting down or packing if used on an earlier gun. If you dont mind cheeseheaded screws, these can be bought for about 10p each from Chronos or the like. The earlier triggers had a wide metal trigger and sear. The later ones had narrower triggers and sears and the trigger became a slip on plastic thing you pinned onto the actual trigger piece. Ive seen sears with the large pivot hole round and others that are elongated. I think they all swap. Im noy sure if trigger pin sizes changed slightly at some point as I remember having to file some to fit the TE (mk3)version I had as a kid. The later versions have the trigger stop pin fitted so you only have to sort the other two. GO TO NEXT POST
    Last edited by ggggr; 25-02-2024 at 09:48 AM. Reason: update

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •